(Download putting machine into service)
- Commissioning of the machine is ensured by our Technical Department.
- For commissioning, prepare some sheet metal plates for testing: 200 mm wide strips, length depending on your machine capacity.
- Select sheet metal nature and thicknesses generally used for your production requirements.
IMPORTANT: AS WE ENSURE INITIAL START UP OF THE MACHINE, ANY USE OF THE MACHINE BEFORE ARRIVAL OF OUR TECHNICIANS WILL RESULT IN THE SUSPENSION OF OUR WARRANTY. THIS SUSPENSION WOULD BE LIFTED ONLY ONCE THE MACHINE HAS BEEN TESTED AND, IF NEED BE, REPAIRED AT THE CUSTOMER’S EXPENSE.
AMADA PROMECAM HYDRAULIC PRESS BRAKE TECHNICAL MANUAL
Back to 6) LEVELING OF THE MACHINE
Continue to 8) OPERATING AND STORAGE CONDITIONS
Download the full Amada Promecam ITS Hydraulic Press Brake 45899 Manual
About Automec, Inc.
If you are having issues with your Press Brake and need a Backgauge Control Upgrade Kit you have come to the right place. Automec is the industry leader in Retrofitting Pressbrakes and Shears.
Our positioning systems consist of a programmable control where the operator enters a dimension and a motorized gauging mechanism automatically moves through a sequence of programmed dimensions. These systems can be retrofitted to press brakes, shears, cut-off saws and punches.
Whether you need a press brake retrofit or a new press brake, contact us at (781) 893-3403 for help.