The CNC 9×9 backgauge control system is a simple-to-use 9 bend, single axis system that was developed as a low cost solution to be used with Automec’s series of backgauges for pressbrakes. The system comes with a two year warranty.
The typical CNC 9×9 user bends simple parts. The system can be used for single bend “go to” positioning or sequential bending of up to 9 bends with up to 9 repeats of identical bends.
The CNC9x9 backgauge system retains the same speed, accuracy, and repeatability as provided by Automec’s higher end controls at a more affordable price. The system also features bend allowance and inch/mm conversion. The operator can display backgauge position, bend number, and cycles per bend. Error messages appear when unattainable dimensions are entered and all backgauge dimensions can be offset ± .999” with one data entry.
The CNC9x9 backgauge system consists of a mechanical gauging mechanism, controller, gauge bar, (2) flip fingers, instruction manual, interconnect cables and mounting hardware.
The CNC9x9 is also offered as a control only upgrade for our customers looking to replace their old G24 controls.
Control Specifications
- 9 Bends per Job
- 9 Cycles per bend
- 1/2″ LCD Display
- Bend allowance ± .999”
- Gauge Offset – All backgauge dimensions can be offset ± .999” with one data entry.
- .001” resolution
- IN/MM conversion
- Tactile feel pushbuttons
- 5 Year flash memory backup
- 20″ or 24”Backgauge
- Input power – 115 VAC ± 10% 50/60 HZ, 1A MAX (Control)
- Contol size – Height 8 1/3″ x Width 10″ x Depth 2 1/4″
- 2 year warranty
Learn More about the CNC9x9 by clicking on the tabs above.
Backgauges Available for CNC 9X9
G24 Series
| Model A | |
|---|---|
| Holding Force | 200 lbs. |
| # of Drives | 1 |
| Weight | 200 lbs. |
| Overall Height | 26˝ |
| Overall Depth | 42˝ |
| Overall Width | 16˝ |
| Gauge Bar Length | 3´ |
| Positioning Speed | 600 IPM |
| Gauge Travel | 24˝ |
| Repeatability | ± .002˝ |
| Vertical Height Adjustment | 10˝ |
| Recommended Width | Up to 4´ |
The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3´ gauge bar for light applications.
| Model B | |
|---|---|
| Holding Force | 400 lbs. |
| # of Drives | 2 |
| Weight | 300 lbs. |
| Overall Height | 26˝ |
| Overall Depth | 42˝ |
| Overall Width | 40˝ |
| Gauge Bar Length | 7´ |
| Positioning Speed | 600 IPM |
| Gauge Travel | 24˝ |
| Repeatability | ± .002˝ |
| Vertical Height Adjustment | 10˝ |
| Recommended Pressbrake Sideframe Width | 5´ to 8´6˝ |
The B is Automec’s most popular model. Ideal for pressbrakes with up to 8´6˝ between the sideframes.
| Model HD | |
|---|---|
| Holding Force | 400 lbs. |
| # of Drives | 2 |
| Weight | 300 lbs. |
| Overall Height | 26˝ |
| Overall Depth | 42˝ |
| Overall Width | 77˝ |
| Gauge Bar Length | 11´ |
| Positioning Speed | 600 IPM |
| Gauge Travel | 24˝ |
| Repeatability | ± .002˝ |
| Vertical Height Adjustment | 10˝ |
| Recommended Pressbrake Sideframe Width | 9´ to 14´ |
The HD heavy-duty offers more rigidity for larger pressbrakes or when progressive die set-ups are used.
MINIBRUTE
| Model MINIBRUTE | |
|---|---|
| Holding Force | 200 lbs. |
| # of Drives | 1 |
| Weight | 200 lbs. |
| Overall Height | 21˝ |
| Overall Depth | 41˝ |
| Overall Width | 31˝ |
| Gauge Bar Length | 66˝ |
| Positioning Speed | 600 IPM |
| Gauge Travel | 20˝ |
| Repeatability | ± .002˝ |
| Vertical Height Adjustment | 10˝ |
| Recommended Width | 3´ to 8´ 6˝ |
The MINIBRUTE compact gauge for pressbrakes with 3´ to 8´ 6˝ between sideframes. This unit is available with a 66˝ gauge bar and provides up to 20˝ of travel.