The G24 series backgauges for the Automec PC800 are designed for applications where 24” of front to rear travel is desired. Each system features Automec’s DC motor drive which is backed up by an electromechanical disc brake once the backgauge reaches position. This drive system is known for its high reliability and holding force.
MODEL A – 24″ Travel backgauge
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Heigh 26˝
Overall Dept 42˝
Overall Width 16˝
Gauge Bar Length 3´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± . 002˝
Vertical Height Adjustment 10˝
Recommended Width Up to 4´
The A compact gauge for press brakes with 12˝ to 42˝ between
side frames. This unit is available with a 3´ gauge bar for light
applications.
MODEL BP HD/P – 24″ Travel backgauge
Holding Force 400lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length 7´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± . 002˝
Vertical Height Adjustment 10˝
Recommended Press brake
Side frame Width 5´ to 8´6˝
The P models are required for Amada, Promecam, and other
brakes in which the rear bed clearance is less than 7˝. This
low-profile backgauge bolts right to the die rail.
MODEL B 24″ Travel backgauge
Holding Force 400lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length 7´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± . 002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake
Sideframe Width 5´ to 8´6˝
The B is Automec’s most popular model. Ideal for press brakes
with up to 8´6˝ between the sideframes.
MODEL HD 24″ Travel backgauge
Holding Force 400lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 77˝
Gauge Bar Length 11´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± . 002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake
Sideframe Width 9´ to 14´
The HD heavy-duty offers more rigidity for larger press brakes
or when progressive die set-ups are used.
MODEL TD 24″ Travel backgauge
Holding Force 600lbs.
# of Drives 3
Weight 450 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 148˝
Gauge Bar Length 18´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± . 002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake
Sideframe Width over 14´
The TD has 3 drive screws with the center drive flanked by 2
drives 6’ away on each side. Designed for large bed press brakes.