Carefully follow the procedure given below to level your machine correctly.
Provide two 150 X 150 X 5 mild steel shims
- According to the date on which the machines are manufactured, screws refs. 1 can be located
either inside or outside the frame. - With the machine laid directly on the floor, test its horizontality with a spirit level placed successively
in N1 and N2. - A 2 mm per metre level fault (in N1 and N2) is acceptable.
IMPORTANT
THE MACHINE SHOULD NEVER REST ON OTHER SUPPORTS THAN C1, C2, C3. SCREWS REF 1 SHOULD NEVER BE USED TO CORRECT THE LEVEL. THEIR ONLY TASK IS TO ENSURE THE TRANSVERSE STABILITY OF THE MACHINE. FOR SPECIAL INSTALLATION CONDITIONS REFER TO AMADA’s TECHNICAL DEPARTMENT.
BACK TO AMADA PROMECAM HYDRAULIC PRESS BRAKE TECHNICAL MANUAL
Back to 5) INSTALLATION AND TAKING DELIVERY
Continue to 7) PUTTING MACHINE INTO SERVICE
Download the full Amada Promecam ITS Hydraulic Press Brake 45899 Manual
About Automec, Inc.
If you are having issues with your Press Brake and need a Backgauge Control Upgrade Kit you have come to the right place. Automec is the industry leader in Retrofitting Pressbrakes and Shears.
Our positioning systems consist of a programmable control where the operator enters a dimension and a motorized gauging mechanism automatically moves through a sequence of programmed dimensions. These systems can be retrofitted to press brakes, shears, cut-off saws and punches.
Whether you need a press brake retrofit or a new press brake, contact us at (781) 893-3403 for help.