(Download programming Amada Promecam press brake ITS)
17 -1 PROGRAMMING OF A PART
17 – 2 PROGRAMMING OF BENDS
In the case of a 3-axis MB3 numerical control, program the dimension of the R axis or the Z axis, using:
17 ·3 FINDING PINCH DIMENSION
17 – 3 – 1 IN MANUAL MODE
Position of switches on electrical control compartment
resetting, green indicator light is on
proceed in the same manner if the program has other bends.
17 – 3 – 2 IN PROGRAMMING MODE
17 – 4 FINDING BENDING DEPTH VALUE
Position of switches on electrical control compartment
resetting, green indicator light is on
17 – 4 – 1 IN MANUAL MODE
1 7 – 4 – 2 IN PROGRAMMING MODE
17 – 5 PRODUCTION
Position of switches on electrical control cabinet
resetting, green indicator light is on
You can now make the first bend.
After making the first bend, the numerical control is automatically placed on next bend. Always wait for the end-of-positioning beep before pressing the pedal again.
BACK TO AMADA PROMECAM HYDRAULIC PRESS BRAKE TECHNICAL MANUAL
Back to 16) – Amada Promecam numerical control customization
Continue to 18) – Amada Promecam ROUTINE MAINTENANCE OPERATIONS
Download the full Amada Promecam ITS Hydraulic Press Brake 45899 Manual
About Automec, Inc.
If you are having issues with your Press Brake and need a Backgauge Control Upgrade Kit you have come to the right place. Automec is the industry leader in Retrofitting Pressbrakes and Shears.
Our positioning systems consist of a programmable control where the operator enters a dimension and a motorized gauging mechanism automatically moves through a sequence of programmed dimensions. These systems can be retrofitted to press brakes, shears, cut-off saws and punches.
Whether you need a press brake retrofit or a new press brake, contact us at (781) 893-3403 for help.